Page 13
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
SET NEW RECIPES (cont.)
29877 090401
8. Using
(-)
and
(+)
, set the amount of brew water, in
ounces, to be dispensed for that particular batch
size.
9. When finished, press another batch size and re-
peat step #8 for that size. Continue setting all batch
sizes.
10. When finished setting all batch sizes, press and
release
DONE
. The display should read
3 BATCH
SIZES DONE?
11. If the three batch sizes are not correct, press and
release
NO
to return to the
BREW OUNCES
setup
screen and repeat steps 8 through 10. If the three
batch sizes are correct, press
YES
. This will ad-
vance to the
% BYPASS
function. (Refer to page
19 for description of
% BYPASS
function.)
12. Using
(-)
and
(+)
set the amount of bypass water
(percentage) to be dispensed
around
the grounds
for that particular batch size.
13. When finished, press another batch size and re-
peat step #12 for each batch to be set.
14. When finished setting each batch size, press
DONE
.
The display should read
3 BATCHES DONE?
15. If the three batch sizes are not correct, press and
release
NO
to return to the
% BYPASS
setup
screen and repeat steps 12 through 15. If they are
correct, press
YES
. This will advance to
SET PULSE
BREW
. (Refer to page 20 for description of
SET
PULSE BREW
function.
16. To
SET PULSE BREW,
if setting pulse brew
BY
EXAMPLE
(brewing into a funnel) press
YES
and
proceed with the setup instructions for
SETTING
PULSE BREW - BY EXAMPLE, on page 22.
17. If setting pulse brew by
ENTER TIMES
(entering
known times) press
NO
. The display should read
ENTER TIMES.
Press and release
YES
and pro-
ceed with the setup instructions for
SETTING
PULSE BREW - ENTER TIMES, page 23. After
SET
PULSE BREW
has been accomplished, the next
function will be
SET PREINFUSION.
(Refer to page
24 for description of
SET PREINFUSION
function.
18. To
SET PREINFUSION
press
YES
in the
SET PRE-
INFUSION
screen to proceed. The display should
now read
ON TIME
and a batch light will be
blinking.
19. Using
(-)
and
(+)
, set the amount of time the brew
water will initially
presoak
the grounds for that
particular batch size.
20. When finished, press another batch size and re-
peat until all three batch sizes are set.
21. When finished, press
DONE.
The display should
now read
OFF TIME
and a batch light will be
blinking.
P2416
P2417
