background image

Page 2

41342  030912    

BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY

Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:

1) Airpots, thermal carafes, decanters, GPR servers, iced tea/coffee dispensers, MCP/MCA pod brewers thermal servers 

and Thermofresh servers (mechanical and digital)- 1 year parts and 1 year labor. 

2) All other equipment -  2 years parts and 1 year labor plus added warranties as specified below:

 

a) Electronic circuit and/or control boards - parts and labor for 3 years. 

 

b) Compressors on refrigeration equipment - 5 years parts and 1 year labor. 

 

c) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis - parts 

and labor for 4 years or 40,000 pounds of coffee, whichever comes first.

These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be 

commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the 

applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured 

by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, 

improper maintenance or repair, non periodic cleaning and descaling, equipment failures related to poor water quality, 

damage or casualty. In addition, the warranty does not apply to replacement of items subject to normal use including but 

not limited to user replaceable parts such as seals and gaskets. This warranty is conditioned on the Buyer 1) giving BUNN 

prompt notice of any claim to be made under this warranty by telephone at (217) 529-6601 or by writing to Post Office 

Box 3227, Springfield, Illinois 62708-3227; 2) if requested by BUNN, shipping the defective equipment prepaid to an 

authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under 

warranty.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EX-

PRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY 

OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN are not authorized to make 

modifications to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such 

individuals, whether oral or written, do not constitute warranties and should not be relied upon.

If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive op-

tion while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the 

applicable parts and labor warranty periods specified above) to repair the defective components, provided that this repair 

is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for 

the equipment.

THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS 

EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S SOLE OPTION 

AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.

In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of 

use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities 

or services, or any other special, incidental or consequential damages.

392, AutoPOD, AXIOM, BrewLOGIC, BrewMETER, Brew Better Not Bitter, BrewWISE, BrewWIZARD, BUNN Espress, BUNN 

Family Gourmet, BUNN Gourmet, BUNN Pour-O-Matic, BUNN, BUNN with the stylized red line, BUNNlink, Bunn-OMatic, 

Bunn-O-Matic, BUNNserve, BUNNSERVE with the stylized wrench design, Cool Froth, DBC, Dr. Brew stylized Dr. design, 

Dual, Easy Pour, EasyClear, EasyGard,  FlavorGard, Gourmet Ice, Gourmet Juice, High Intensity, iMIX, Infusion Series, In-

tellisteam, My Café, Phase Brew, PowerLogic, Quality Beverage Equipment Worldwide, Respect Earth, Respect Earth with 

the stylized leaf and coffee cherry design, Safety-Fresh, savemycoffee.com, Scale-Pro, Silver Series, Single, Smart Funnel, 

Smart Hopper, SmartWAVE, Soft Heat, SplashGard, The Mark of Quality in Beverage Equipment Worldwide, ThermoFresh, 

Titan, trifecta, Velocity Brew, A Partner You Can Count On, Air Brew, Air Infusion, Beverage Bar Creator, Beverage Profit 

Calculator, Brew better, not bitter., BUNNSource, Coffee At Its Best, Cyclonic Heating System, Daypart, Digital Brewer 

Control, Nothing Brews Like a BUNN, Pouring Profits, Signature Series, Tea At Its Best, The Horizontal Red Line, Ultra are 

either trademarks or registered trademarks of Bunn-O-Matic Corporation.

Summary of Contents for DUAL SH DBC WITH SMART FUNNEL DUAL068000





































Reviews: