background image

Raises the rack to the highest position close 
to the ceiling 

Stops any movement upward or downward 

Lowers the rack to its lowest position

Your BUNGY drying rack is pre-programmed with lower 
and upper limit switches.
These can be changed using the provided key to turn the 
2 engine tuning screws. These can be accessed after 
removing the engine cover. 
Bear in mind that the upper limit switch must leave a 
minimum safety distance from the engine cover and the 
lower limit switch must leave at least two rounds of the 
suspension strips coiled on the engine. 

Adjust the screw corresponding to the desired direction 
  - Turn to the side "-" to reduce the limit switch 
  - Turn to the "+" increases the limit switch

Using the wall switch

9.

10.

Technical specifications

Warranty

STOP

v. CDH1S -F01

BUNGY ensures that this equipment will remain free 
from manufacturing defects for two years effective 
from the date of original purchase, confirmed by proof 
of purchase.
This warranty does not cover: 
a. Travel and maintenance interventions 
b. Transport and travel for repair at home 
c. Any damage, loss, cost or expense, direct, indirect, 
incidental, consequential or special, arising out of or 
related to the product. 
d. Damage resulting from: 
• Incorrect installation 
• Improper Use 
• Changes to equipment 
• Other causes beyond the control of BUNGY 
This warranty does not affect your statutory consumer 
rights, consecrated in national laws, resulting from the 
respective sale / purchase contract.

Model 

   CDH1S 

E

Color 

   White

Motor voltage    

 

220 ~ 240VAC 50Hz

Drying rack size   

 

1,20m x 0,70m

Clothesline linear length   

8,40m

Required area for instalation 

1,30m x 0,80m mínimo

Maximum height from ceiling 

1,60m (lower position)

Maximum supported weight 

20Kg 

Reprogramming of the 

limit switches

Summary of Contents for CDH1S-F

Page 1: ...g clothes in a convenient and environmentally friendly way is at the dis tance of a simple assembly Before starting the installation of your drying rack please read this entire manual If you have difficulties please contact one of our installers who can do the assembly for you bungy pt facebook com bungy pt Patented system Made in Portugal ...

Page 2: ...d matrix mark the 4 fixing holes leaving the required space for the rack not to touch the wall Drill 4 holes with 8mm in diameter in the ceiling and put the wall plugs 1 2 Free area of 130cm x 80cm Should be taken into account the existence of any obstacle to the ascent and descent of the drying rack If you have a droppes ceiling the installation should always be performed by a professional WARNIN...

Page 3: ...in the order shown in the image Connect to 230V using an appropriate power cord not supplied and respecting the demonstrated scheme Secure the wall switch in an appropriate location with the supplied screw Fix the hanger to the suspension strips with the supplied screws and nuts 3 6 5 4 7 8 Place the motor cover and tighten the two screws 1 2 3 4 Motor yellow green earth L blue brown black neutral...

Page 4: ...DH1S F01 BUNGY ensures that this equipment will remain free from manufacturing defects for two years effective from the date of original purchase confirmed by proof of purchase This warranty does not cover a Travel and maintenance interventions b Transport and travel for repair at home c Any damage loss cost or expense direct indirect incidental consequential or special arising out of or related t...

Reviews: