Package contents
Tools you will need
On the roof, indoors, in a sheltered area, need-
ing only a power point with live, neutral and
earth.
Where to mount your BUNGY
x4 x4
x4 x4
x2 x2
Set up
Power drill
Drill bit 6mm and 8mm
Wrench
8mm
Phillips
P2
Screwdriver
Hammer
Cardboard matrix for marking the holes in the
Rack
Limit switch
tuning key
Exterior wall
switch
Motorized ceiling structure
Drilling
Using the cardboard matrix mark the 4 fixing holes,
leaving the required space for the rack not to touch
the wall.
Drill 4 holes with 8mm in diameter in the ceiling and
put the wall plugs
1.
2.
Free area of 130cm x 80cm. Should be taken
into account the existence of any obstacle to
the ascent and descent of the drying rack.
If you have a droppes ceiling the installation
should always be performed by a professional.
WARNING: Improper installation of this equip-
ment can cause it to malfunction or put people
at risk - If you are unsure you can perform a
correct and safe installation, please contact a
professional. Go to BUNGY.pt.
STOP
STOP
