16
cardio-verter deibrillators
■
Requests regarding use of Wi-Fi and wireless LAN
• Channels available for use difer between countries. When using Wi-Fi overseas, check the available frequency
and regulations, etc., of that country.
• Wireless LAN (LAN) uses electromagnetic waves for communication, therefore has the advantage of being avail-
able anywhere where the electromagnetic waves reach. However, if security has not been set, a malicious third
party may steal or view your communicated content or otherwise invade your privacy. We recommend you set
security and use at your judgment and responsibility.
• Do not use in areas where there is a magnetic ield such as near electrical products, AV or OA devices, or where
electronic waves are emitted. There may be a large amount of noise or communication may no longer be pos-
sible due to the efects of the magnetic ield or electrical noise (This efect is particularly apparent during usage
of microwave ovens).
• If used near televisions, radios, etc., it may afect the television screen through poor reception, etc.
• It may not be possible to search correctly if there are multiple wireless LAN access points in the near proximity
and you are using the same channel.
• Consult with the airline before using onboard aircraft.
• If this device’s screws are removed and internal modiications are made, the technical standards conformity cer-
tiication, etc., will become invalid. Using the device in such a state infringes with the Radio Act therefore please
make sure not to use it.
• Frequency bands
Below are the frequency bands which Wi-Fi equipped devices use.
Available frequency band: 2412MHz - 2462
MHz,
5180MHz - 5240
MHz, 5745
MHz - 5825
MHz
Modulation method: DS-SS, OFDM
Assumed interference distance: Within 40m
Ability to change frequency: Uses the entire range between 2412MHz - 2462MHz and can avoid bands of
mobile identiication equipment.
The device is going on be operated in 5150~5250 frequency range. It is restricted indoor environment only.
■
Requests regarding use of Bluetooth
In the frequency bands where this product can be used, apart from microwave ovens, industrial/scientiic and medi-
cal equipment, there are on-site wireless stations for mobile identiication on plant manufacturing lines, etc., which
require licenses, speciied low power wireless stations which do not require licenses, and amateur wireless stations,
etc. (hereinafter “wireless stations”) in operation.
1. Before using this product, check that there are no “other wireless stations” in operation.
2. In the unlikely event that radio wave interference occurs between this product and “other wireless stations”,
promptly change your location or turn of the power, etc., to avoid such interference.
3. This device has a security function in compliance with Bluetooth’s standard as security for communication us-
ing the Bluetooth function, however security may not be suicient depending on settings, etc. Be careful when
communicating using the Bluetooth function.
Please understand that we cannot take responsibility if data or information leaks when communicating using
the Bluetooth function.
• Frequency bands
Below are the frequency bands which Bluetooth uses.
Available frequency band: 2400MHz
Modulation method: FH-SS and other methods (other than DS-SS, /DS-FH/FH-OFDM multiple method/OFDM
method)
Assumed interference distance: Within 10m
Ability to change frequency: Uses the entire range between 2400MHz - 2483.5MHz and cannot avoid bands of
mobile identiication equipment.
■
Radiation Exposure Statement
This device meets the goveenment’s requirements for exposure to radio waves. This device is designed and manufac-
tured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communica-
tions Commission of the U.S. Government.
The exposure standard for wireless device employs a unit of measurement known as the Speciic Absorption Rate,
or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating positions ac-
cepted by the FCC with the device transmitting at its highest certiied power level in all tested frequency bands.
We suggest buying earphones in Europe Standard, the sound quality and microphone function would be better.
■
Earphones notes(product is not supplied with earphone)
We suggest buying earphones in Europe Standard, the sound quality and microphone function would be better.
