Connect the device only to the power
source indicated in the operating in-
structions or on the unit.
Run the power supply cable so that no
one can step on it and nothing can rest
on or against it. The cable is particular-
ly at risk in the area of the plug, the
socket and where it comes out of the
unit.
If you are not going to use the unit for
some time, remove the plug from the
socket.
6. Object intrusion
Take special care that no liquids or
objects get inside the unit through the
openings in the housing.
7. Repair in the event of damage
The machine must be repaired by qua-
lified persons. Never apply other
maintenance than given in the opera-
ting instructions.
8. Set up
Set up the appliance in a suitable room.
A unit filled with chemicals must be
placed on chemical resistant floor or in
a safety tray. In case of overflow or
leakage look up the information in the
appropriate safety data sheets.
Do not allow chemicals to go into the
drain. The unit must not be used in the
residential area; keep away from child-
ren.
9. Appliance check
Close the drain valves before filling
the tanks. Use the machine only when
all tanks are filled with liquid. Other-
wise damage of the heating elements
and tanks will happen immediately.
Control the liquid level daily.
The temperature of the solution can
differ to the adjusted temperature.
Control the function of the thermostats
weekly by an external (glass) thermo-
meter.
10. Chemistry handling
Wear goggles and protective gloves
for all work. Pay attention on good
room ventilation. Avoid contact with
skin, eyes and mucous membranes.
Take off clothing soaked in caustic
substances immediately. Rinse splas-
hes on skin immediately with copious
amounts of water.
In the event of accidents or feeling un-
well always consult a doctor.
Bungard Elektronik GmbH&Co KG· · Rilke Str. 1 · D-51570 Windeck
Tel 02292 5036 · Fax 6175 · [email protected]
Compacta L30
Instructions for use
Plating line
Page 2
