ccd_manual_e
Page 4 /36
Mechanic:
•
rigid and flat construction with low moving weights and high quality bearings for high-speed position-
ing
•
Machine bed with universal fixation system, suitable for clamp or span fixing or for reference pins (fi-
ducials). Fixing pcbs with reference/fixing pins at no extra costs by using our standard backing
boards. As an option a vacuum table can mounted underneath the base table to allow vacuum fixa-
tion of the PCB
•
You can fix the PCB at the machine zero position. Devices for span fixing included, clamp fixing for
heavy-duty milling possible
•
Integral depth limiting device for isolation milling and engraving on uneven surfaces is part of deliv-
ery, work level is roughly set by the Z stepper motor and fine adjustment is done with the micrometer
screw of the depth limiter
•
Removable, spring-load pressure foot for drilling of flexible and uneven PCBs
•
Stack processing of several boards at once is possible (typical stack: three 1.6 mm thick boards plus
one underlay/base sheet)
•
Working depth not limited by depth sensor, only by flute length of the tool (standard: 5..10 mm)
•
All common PCB drills/mills with 1/8" shank, with industry-standard length setting by collar can be
used
•
Control unit, full set of cables
•
Independent controller to connect the CCD to any standard PC via USB or serial port
Spindle:
•
KaVo high precision spindle motor, 150 Watt, 63 000 RPM, with heavy-duty long-life bearings, includ-
ing 1/8" (3.2 mm) chuck
•
Software controlled spindle speed. Electronic spindle load control with software feedback. Spindle
quick start and quick stop
•
Drill speed: 5 hits/s (=18.000 holes per hour)
•
MTC:
Fast, semi-automatic tool change by quarter turn of the fixing knob. The machine is locked
there, no height recalibration required
•
ATC:
Automatic tool change, simultaneous 16 out of 99 tools per Job
Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany
Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: [email protected]