ccd_manual_e
Page 12 /36
Installation Manual RoutePro3000
S
ystem requirements:
CCD with Controller 2006 or younger.
Computer with Windows XP SP3 till Windows 10 64 bit. 1,3 GHz Processor, 6 GB
main memory and 200 MB free disc space.
Internet connection during setup and registration. The internet connection is ne-
cessary to install updates like Visual C++ and Framework 4. In addition you can
register your RoutePro3000-version and, if there, activate licenses for special
modules (laser, dispense, calibrate etc.).
After installation you can of course work offline.
Procedure:
Read the manual of RoutePro3000. Connect CCD to your computer. Then install
RoutePro3000: Double-click on “SetupRoutePro3000.exe” and follow the routine.
Depending on your system Microsoft Framework 4 and Microsoft Visual C++ will
be installed automatically. If you do not have the latest firmware on your CCD
controller, then your controller will be flashed automatically. A restart of Route-
Pro3000 may be required in this case (With machines younger than 2016, it can
be necessary to do the upgrade manually (see below).
If you use special modules like laser, calibration or dispensing, then please read
the special instruction for these modules coming with the hardware and refer to
the applying help topics in the RoutePro manual/help system.
The standard version of RoutePro3000 is for free, but after a trial time of 14 days,
you need to fill out a register form. The registration process is described in the
help file. Please note: from 2014 on you do not need to apply for a license any
more. After filling out the registration form you can directly work. With internet
connection and without. In addition you have the chance to create error reports,
which help us to help you either to directly solve your problem or to get informa -
tion where a bug fix may be required.
After successful registration you can test all available modules for a trial period of
14 days.
To test the modules, please go to
options
and wait till your desired modules shows up at the
field
available modules.
Click on your desired module. After that you can activate your test li-
cense. It may be necessary to restart RoutePro3000.
After 14 days a license has to be acquired. Please note that special hardware needs to be ob-
tained for the modules (laser head, camera, etc.). To apply for a license, you need to have a
Computer with internet connection. If you do not have an internet connection, please contact
us to apply for an offline license.
In Regards of the license system, please read the corresponding chapter in the RoutePro3000
help. The topic is there very well explained.
For different machines it can be necessary to use a different routine:
New machines
The SetupRoutePro3000.exe file is located on the CD. All necessary files, including the ma-
chine and tool parameters, are located in this setup. The documents,
licenses, and projects folders are also stored on the CD, so that you
can, for example, read the help before the installation, or have ac-
cess to the licenses without installing RoutePro3000.
Existing machines with RoutePro3000:
We created a separate file
“UpdateRoutePro3000.exe”. This file does not contain the resource
data and thus your already existing parameters for machine and
tools will not be overwritten. This Update version can also be down-
loaded from our homepage.
Make sure your resource data are in the correct location.
(standard: C:\Program Files\RoutePro3000\Resources)
Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany
Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: [email protected]