ccd_manual_e
Page 26 /36
Modules and Extensions
Various hardware and software extensions are available with the software platform RoutePro3000.
These modules are currently available:
Plus 3000
LaserPro 3000
DispPro 3000
Document 3000
Calibrate 3000
Inspect 3000
API 3000
QR-Code 3000
All modules can be tested 14 days free of charge and without obligation. To do this, open
RoutePro3000 and go to TAB Options. In the right area is an animation on which the still available
modules are displayed one after the other. By clicking on the appropriate module, you can activate the
test license. Please note: separate hardware is required for the LaserPro 3000, DispPro 3000,
Calibrate 3000, Inspect 3000 and QR-Code 3000 modules.
We will briefly present the individual modules here. You will find more detailed information on our
homepage at:
http://www.bungard.de/index.php/de/produkte/software/routepro-3000
Plus 3000
With this module activated you will get the following
extra features:
•
You may load up to 32 layers per project !!
•
In the Wizard you may select the type of pro-
ject, depending on your selection, the project
will be stored under the project type name.
This can be useful to separate projects
meant for PCB or stencils etc.
•
You may position the machine by moving and
clicking with the mouse in the camera
screen. It will also try to center the drill hole.
This can be useful if you want to capture the
holes from an existing PCB.
•
Under the tab GENERAL you may set the origin
of your material. This can be the zero position of
machine but can also be calculated from the
material position.
•
Under the Views tab you now have the following
extra' s:
▪
Show material
▪
Set the intensity of the line
grid
Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany
Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: [email protected]