In locations with extreme humidity and heat, the combination can cause extreme condensa-
tion inside the tent. This will be UNDERNEATH the mattress. If you are experiencing similar
conditions, try to ventilate the tent to prevent the condensation.
PLEASE NOTE
that when using it for the first time please note that the canvas can be stiff.
It gets coated with various resins to ensure its longevity and UV qualities, so when first operating
the canvas has no “memory” of how to fold.
After a couple of uses the canvas will evolve a “memory” of how to fold and the folding will be-
come neater and easier as time passes.
The initial folding process will seem stiff but with time it will ease into its shape and fold neatly.
INCLUDES
It boasts:
• Full electric operation
• Shade awning around all four sides of the tent
• Tent fully erect, with awnings, in 30 seconds at the press of a button.
• Tent fully closed, all sides & awnings folded away in 30 seconds at the press of a button
• 2100 x 1350 x 300 mm closed & 2100 x 1350 x 1030 opened
• Window covers zip open/closed from the inside
• Insulated roof inside
• All aluminium construction
• Stainless steel supports:
à
The tent has an existing aluminium frame built into the bottom.
à
If replaced with stainless steel the frame can accommodate an overhang of up to
500mm.
Includes:
• 100mm high density foam mattress
• 12V outlet inside
• LED light inside
• All aluminium construction ladder
Solar Wiring:
•
Since 2017 we incorporated solar wiring as a fixture with every BunduTop.
• The wiring for the solar wiring runs underneath the roof-lining.
• There will be a red Brad Harrison plug on the roof of the tent for easy connection to your solar
panel.
• There will be a red Brad Harrison plug on the bottom of the tent for easy access to your
vehicle’s wiring.
• Please remember when mounting a solar panel that the max weight is 25 kgs and the weight
needs to be evenly spread – make sure the supports run the entire length of the roof.
3mm Dyneema Rope to
lift/lower the tent
Awn at a 45° angle so that you
don’t have to close the
windows entirely
in rain
Our Mesh is coated in a
rubber compound
making it extremely
flexible and
durable
We use a 300gsm
UV treated Riptech canvas
Frame built into the bottom of the tent so it
can be bolted directly to your Load Bars or Roof Rack
Raw Aluminium Sheet roof to reflect
heat away even in direct sunlight
Foam backed Roof Lining to absorb
moisture and avoid condensation
100mm High Density Foam
mattress inside
2000lbs Winch Motor (or 907kgs)
1
Electronics Box
Cigarette lighter plug inside
(You can also add a USB port)
2
12V LED light in the roof
(You can also add 12V Fans)
3
Red Brad Anderson
Grey Brad Anderson
Manual Override
4
Limit Switch near winch
5
Limit Switch on arm
6
Red Brad Anderson
7
1
2
3
4
5
6
7
Summary of Contents for BunduTop
Page 1: ...BUNDUTOP MANUAL TM ...
