Bully Dog GM DURAMAX 6.6L 2001-2006, Installation Manual, Page: 12 / 24

11
Monitor
OUTLOOK MONITOR MOUNTING INSTRUCTIONS
Bully Dog off ers three diff erent options for mounting the OutLook Monitor. Each lo-
cation option places the OutLook Monitor in an easily accessed viewing area for the
driver.
WINDSHIELD MOUNT:
1. Locate the windshield mount included with the OutLook Moni-
tor as seen in. This does not come with mounting glue. Glue that
will adhere metal to glass can be found at any hardware store.
2. Place glue onto the window mount piece with the OutLook
Monitor holder detached from the windshield mount piece.
3. Hold the windshield mount piece on the windshield just to the
left of the steering wheel for one minute.
4. Let the glue set up as instructed by glue packaging and then slide
the OutLook Monitor holder onto the window mount with the Out-
Look Monitor attached.
PILLAR POD MOUNTING:
1. Locate the OutLook Pod Mount Circle that is included with the Out-
Look Monitor and attach the OutLook Monitor to the Pillar Pod Circle
by running the OutLook wiring harness through the rectangular hole
in the circle and snap-
ping the back onto the
OutLook.
2. Follow the instructions for installing the single Pillar Pod
mount that are included in the pillar mount package.
3. Run the OutLook wires down through the hole in the pillar
mount system and connect the OutLook to the other harnesses.
4. Finally slide the Pod Mount Circle with the OutLook attached
into the pillar
mount hole.