SpaceKeeper Console (SKC) – Installation Operation Maintenance Manual
3
© Copyright 2013 CGC Group Inc. Installation Operation Maintenance Manual is Subject to Change without Notice Last Revised Nov 15, 2019
INFORMATION
Handling
Care must be taken in handling the SpaceKeeper Console units and other accessories to ensure
that this equipment does not sustain any damage. It is recommended that the units be
transported individually on a two–wheel cart.
The protective shipping packaging should remain on the unit until it is ready for installation.
During construction, the unit must not be run and shall be sheltered from contaminants and
debris such as drywall dust, wood chips, and paint that could damage the fan or block the
cooling/heating coil which may result in diminished performance.
Storage
The unit must be stored in an upright position at all times.
Failure to maintain the unit in an upright position may result in permanent damage to the unit.
Dropping the unit or exposing it to extreme shock or vibration may also result in permanent
damage to the interior components and piping.
The unit shall be stored in a non-corrosive environment, sheltered from conditions of extreme
temperature or humidity. Subjecting the unit to conditions of this nature may result in
significantly reduced performance, reliability, and operational life.
The unit is intended for interior use only and should be stored indoors at all times to protect it
from the elements and to help eliminate the potential growth of indoor air quality (IAQ)
contaminants.
If indoor storage is not possible, the equipment may be stored outdoors during the summer
months only, if the following provisions are met:
The equipment must be placed on a dry surface, or raised off the ground in a manner which
allows for air-circulation beneath the unit.
A waterproof tarp must be used to cover the equipment in order to provide protection from
the elements.
Continuous ventilation to the units must be provided to help prevent moisture accumulation
on the interior and exterior surfaces. Moisture buildup on, or within the unit’s insulation may
result in microbial growth that can lead to odors and serious health-related IAQ problems.
The units must be stored in their original packaging.
The individual units shall not be stacked on top of one another.
If the unit was previously in use, ensure that all water has been blown out and that all hose
connections are plugged during storage.
