© Copyright 2018 CGC Group Inc.
Installation Operation Maintenance Manual is Subject to Change without Notice- Last Revised June 2018
7
BULLDOG SideWinder – Installation, Operation, and Maintenance Manual
PIPING
CAUTION: Piping must comply with all applicable codes and regulations
DO NOT bend or kink supply lines or hoses (If supplied). Supply and return ultra flex hoses
(3 & 4) available from the factory are fitted with swivel joint fittings at one end to allow
removal for future servicing.
NOTE: Insulation of the water piping loop is not required except where piping runs through
unheated areas or areas on the exterior of the building. The normal loop operating
temperature range is 85°F (29°C) to 120°F (49°C).
Figure 6
