background image

SYSTEM FEATURES

Four-Button Remote Control

Remotely lock and unlock your car from a distance.

Starter Immobilizer

You can’t steal what you can’t start. Most insurance companies offer a discount for this feature.

(Optional part #773 required on KE100 only.)

Trunk Release

Remotely opens your trunk. (Optional part #775 required.)

Parking Light Confirmation

Never walk up to a dark car again. Confirms that your vehicle has received a remote signal

and remains on for ten seconds when disarming. (Optional part #775 required.)

Extended Range Antenna

Allows you to operate your system from an extended distance.

Limited Lifetime Warranty

Guarantees life-long protection.

Your system includes:

1-Installation & Operation Guide

1-14-Pin Wire Harness

1-Main Control Module

1-Warranty

1-Four Button Remote Transmitter with Slide Protector

2-Bulldog Window Decals

SYSTEM COMPONENTS

TECHNICAL ASSISTANCE

Should you need help. First check our website at www.bulldogsecurity.com/wires.htm or call our toll-free

Tech Support Hotline Monday through Friday 9AM-8PM and Saturday 10AM-4PM EST at 800-878-8007.

You must give the following information:

•Name

•Telephone Number with Area Code (Fax number if applicable)

•Year, Make, and Model of the vehicle

•The model number of the system you are installing

•The type of assistance you are requesting

If you give the above information you will be called back as soon as possible, usually within 10 minutes.

BEFORE YOU BEGIN

Congratulations, you have purchased one of the most advanced keyless entry systems ever made. Your new

keyless entry is a technological breakthrough utilizing the most advanced, state of the art technology

and components. It is computer controlled and manufactured in the U.S.A. The dependability and variety of

features make Bulldog Security the leader in the industry. Enjoy your new keyless entry for years to come!

Read this manual thoroughly before starting the installation. You must also decide if any options are

desired such as starter immobilizer, trunk release and parking light confirmation. An optional relay may

be needed for some of these options. Please do not skip any steps.

Since there are many different makes and models of vehicles, look at on our website,

www.bulldogsecurity.com/wires.htm.

PRECAUTIONS

This system is designed for vehicles with power door locks only.

This system will add remote keyless entry features to any vehicle with power door locks. This will also

work as a replacement system for the factory installed keyless entry system.

DO NOT use mechanical wiring connections, such as crimp or snap together taps. Follow instructions

on pages 2-3.

DO NOT disconnect the battery if the vehicle has an anti-theft-coded radio or is equipped with an airbag.

Doing so may cause a warning light to be displayed and may require a trip to the dealer to be corrected.

1

Summary of Contents for KE100, KE150, 1702









Reviews: