PROGRAMMING INSTRUCTIONS
To enter programming mode
Press button #4 for 10 seconds then release. You are now in programming
mode. To exit programming mode press and release button #4 again.
Programming 0.7 and 3.5 second door lock/unlock pulse time
(This is used for European cars only)
(Used only with vacuum door lock system)
Press button #1 once the unit is programmed for 3.5 second door lock/unlock.
Press button #1 twice the unit is programmed for 0.7 second door lock/unlock.
Programming for dual pulse lock/unlock
(Used on some Japanese vehicles)
Press button #2 once, the unit is programmed for dual pulse unlock. Press
button #2 twice, the unit is programmed for dual pulse lock. Press button
#2 three, times the unit is programmed for no dual pulse lock/unlock.
Programming a new remote
Press and hold button #1 for 10 seconds. Within 10 seconds press any button
on the new remote.
In most cases the programming will NOT be used.
BUTTON #1
Locks your
vehicle.
BUTTON #2
Unlocks your
vehicle.
BUTTON #3
Pops your trunk
BUTTON #4
Programs your
remote control.
BULLDOG
Lock
Unlock
Trunk
Program
7
