Bullard SparxLift Welding PAPR, Usage & Care

Page: 19 / 41

Changing the Batteries
•
The SparxLift Helmet comes with (2) 3V Lithium
CR2032 cells as the main power source for the ADF.
•
They should be replaced immediately when the
battery warning light comes on and/or at least every 3
years.
•
To change these batteries:
– Open the door frame.
– Unplug the Rapid Connect Cable System to remove the
ADF.
– Slide out the battery holders from each side of the Solar
Assist cartridge
– Discard the old batteries according to your employers
disposal policies.
– Install the new batteries into the battery holder, noting the
proper polarity, and slide the holders back into the cartridge.
– Re-attach the ADF using the Rapid Connect Cable System
– Return ADF to original position.
– Finish by closing the door frame
19