Bullard SparxLift Welding PAPR, Usage & Care, Page: 18 / 41

Changing the Grinding Lens
•
To access the Grinding Lens, press the
Autolift button at the front center of the
helmet
•
This will lift the ADF up to reveal the
polycarbonate grinding lens.
•
Next, from the inside of the helmet, unclip the
two side tabs from their latched position by
pulling inward.
•
Then slide the lens out through the front of
the helmet.
•
Remove the protective film from the new lens
and slide in from the front.
•
Secure with the locking tabs on each side.
18