Bullard SparxLift Welding PAPR, Usage & Care

Page: 17 / 41

Changing the Rear Cover Lens
•
The SparxLift Helmet comes complete with a
rear cover lens to protect the inside of the
ADF.
•
To change this lens begin by opening the
door frame.
•
Unplug the Rapid Connect Cable System to
remove the ADF.
•
Place index finger into finger hold at the top
center of the viewing lens and pull to remove
the cover lens.
•
Remove the protective film from the new
cover lens and slide underneath the four
holding tabs to install.
•
Re-attach the ADF using the Rapid Connect
Cable System and put back into place.
•
Finish by closing the door frame.
17