Bull ESCALA E250, Use And Maintenance, Page: 39 / 162

System Setup Procedure
2-9
Starting the System for the First Time
• Checking the Software Status , below
• First Startup of a Pre-Installed System , on page 2-10.
Checking the Software Status
The software for your system can be:
• Pre-installed
• Not-installed.
By default, the system software is pre-installed on your system, when you receive it. This
makes the first startup of the system easier and faster.
Make sure the system software is pre-installed, by checking that the Preload Report sheet
has been supplied with the system unit. This is a one sheet document which indicates
where you can find the
preload report file on the system disk.
Note:
Once the system is running, you can list the installed software with the command:
lslpp -l | pg
In case the system software is not installed, refer to the AIX Installation Guide .