Bull ESCALA E250, Use And Maintenance, Page: 123 / 162

6-21
Expanding the System Configuration
11. Firmly push the plastic rails towards the media drive.
12.Firmly grip the media drive by the edges. Identify the upper side of the media drive
checking the orientation of any symbols or labels on the front panel of the media drive.
Consult the documentation delivered with the media drive for any specific characteristic.
13.Align the device with its plastic rails in the designated slot and then slide it inside the
unit.
14.Firmly push the device until a click tells you that it is well seated.
15.Connect the first free connector of the split power cable (1) and the SCSI cable (2) to the
media drive.
16.Remove the plastic blank on the front panel that corresponds to the slot in which you
have just installed the media drive, by performing the following steps: