Bull ESCALA E250, Use And Maintenance, Page: 122 / 162

6-20
Setup Guide
7. Install the media drive mounting kit. It consists of one metal spring, two plastic rails and
two contact springs.
If the media drive that you are going to install is already equipped with the media drive
mounting kit,
skip to step 12 , otherwise perform the following steps.
8. Identify the media drive mounting kit and fit together the plastic rails and the contact
springs.
9. Lay the media drive down on a flat surface.
10.On the left side of the media drive, position the metal spring and then the plastic rail,
assuring that the points of the contact spring match exactly with the holes present on the
media drive side. Perform the same operations on the opposite side, positioning the
plastic rail only.