Bull ESCALA E Series, Setting Up The System, Page: 38 / 60

3-10
Setting Up the System
Connecting the Power Cord
Before performing the first startup of the system, the following steps must be performed to
give it AC power.
1. Make sure that the Key Mode Switch is set to the Power Off position and all external
devices connected to the system are powered off.
2. Identify the power receptacle toward the bottom of the rear of the system.
3. Connect the power cord supplied with the system, first to the system unit, and then to
the wall outlet as shown in the figure.
CAUTION:
An electrical outlet that is not correctly wired could place hazardous voltage on metal
parts of the system or the devices that attach to the system. It is the responsibility of
the customer to ensure that the outlet is correctly wired and grounded to prevent an
electrical shock.