Base Unit Setup Procedure
3-1
Chapter 3. Base Unit Setup Procedure
Perform all the procedures described in this chapter in the indicated order to setup your
base unit and make it operational.
-
Connecting Devices
-
Inserting the Operator Panel Key
-
Connecting the Power Cord
-
Starting the System for the First Time
Note:
If you need to connect one or more disk expansion units to the base unit, proceed
as follows:
1. Set up the base unit, start it for the first time and make sure that no errors are
detected during the initial start up, following the procedures described in this
chapter.
2. When you are sure that the base unit operates correctly, connect the disk
expansion unit(s), following the set up procedure described in the
Disk Expansion
Unit Quick Set Up
guide.
Summary of Contents for ESCALA E Series
