background image

 

 

Glossary 

61 

SO-DIMM: Small Outline Dual In-line Memory 

Module  
Smaller alternative to a DIMM, being roughly half 

the size of regular DIMMs 

SSD: Solid State Drive 
It is a data storage device that uses solid-state 

memory to store persistent data. 

SSH: Secured Shell 
SSH is a network protocol that allows data to be 

exchanged using a secure channel between two 

networked devices. 

SSL: Secure Socket Layer 
They are cryptographic protocols that provide 

security and data integrity for communications over 

networks such as the Internet 

TELNET: Telecommunication network 
Telnet is a network protocol used on the Internet or 

local area networks to provide a bidirectional 

interactive communications facility. 

UCM: Ultra Capacitor Module 
The module can ride through  AC outages of max. 

250ms. 

UID: Unit Identifier 
Unsigned integer value that identify users within the 

Linux kernel. 

UPS: Uninterrupted Power Supply 
Supplying power from a separate source when 

utility power is not available. 

URL: Uniform Resource Locator 
The address of a file (resource) accessible on the 

Internet. 

USB: Universal Serial Bus 
A plug-and-play interface between a computer and 

add-on device. The USB interface allows a new 

device to be added to your computer without 

having to add an adapter card or even having to 

turn the computer off. 

UTC: Coordinated Universal Time  
A time standard based on International Atomic 

Time (TAI) with leap seconds added at irregular 

intervals to compensate for the Earth's slowing 

rotation. 

VLAN: Virtual Local Area Network 
A local area network with a definition that maps 

workstations on some other basis than geographic 
location (for example, by department, type of user, 

or primary application). 

VT-d: Virtualization for Directed I/O 
The VT-d architecture enables system software to 

assign one or more I/O devices to a protection 

domain. DMA isolation is achieved by restricting 

access to a protection domain's physical memory 

from I/O devices not assigned to it, through 

address- translation tables.  

VT-x: Virtualization Technology for x86  
Method by which x86-based "guest" operating 

systems can run within another "host" x86 

operating system, with little or no modification of 

the guest OS. 

WOL: Wake-on LAN 
A feature that provides the ability to remotely 

power on a system through a network connection. 

Web Service for Management  
Is a general Web services protocol based on 

SOAP for managing systems such as PCs, servers, 

devices, Web services and other applications, and 

other manageable entities. 

Summary of Contents for bullx blade system



















































































Reviews: