Chapter 2. Getting to know the bullx blade system
23
2.5.2.2
Power Supply Unit module
There are four PSU modules in the bullx blade system, each of 2900W rating. These take
in the AC input of 180VAC to 264VAC and provide 12V main and 3.3V standby outputs.
The four PSU modules provide N+1 redundancy. The typical system power dissipation is
around 7900W depending on the configuration and the customer’s applications. The PSU
modules occupy the rear of the bullx blade system.
The high-level features of the PSU module are as below:
•
Power Supply 2900 W
•
Has two outputs including 12V and a 3.3V stand-by
•
AC input power factor corrected
•
Hot swappable, up to four parallel supplies
•
AC input of 180 to 264V AC
•
PSMI compliant
Figure 2-9. Power Supply Unit
A.
Handle
B.
Latch
C.
Power socket
D.
Cable retention
E.
Fans
F.
Power LED
G.
Fault LED