Chapter 4. Connecting and testing the bullx blade system
49
BHC firmware interfaces
The software interfaces supported by the BHC are:
•
IPMI V2.0
•
WEB GUI
•
SMASH/CLP
•
KVM redirection
•
Virtual media redirection
•
Serial over LAN
Figure 4-3. Blade Hardware Console page
To connect to the console of the blade, you can use the KVM redirection feature of the
BHC.
Note
You should have Java web server installed on your system. This comes with JDK 5.6 and
above versions.
From the BHC, follow these steps:
1.
Click Remote Control to see the Console Redirection window option.
2.
Click the Console Redirection to see Launch Console option.
3.
Click Launch Console to see a pop up of the KVM console window.
This connects the console to the blade.
See
For more information on configuring the bullx B500 compute blades, see bullx B500
compute blade User’s Guide.
