Bull 1GB Intel Ethernet Switch Module, Installation And User Manual

Page: 37 / 308

Installing and Removing the NovaScale Blade 1 GB Intel® Ethernet Switch Module
11
• Limit your movement. Movement can cause static electricity to build up around you.
• Handle the device carefully, holding it by its edges or its frame.
• Do not touch solder joints, pins, or exposed printed circuitry.
• Do not leave the device where others can handle and possibly damage it.
• While the device is still in its static-protective package, touch it to an unpainted metal part of the
NovaScale Blade Chassis platform for at least two seconds. (This drains static electricity from
the package and from your body.)
• Remove the device from its package and install it directly into your NovaScale Blade Chassis
without setting it down. If it is necessary to set the device down, place it in its static-protective
package. Do not place the device on your NovaScale Blade Chassis platform or on a metal table.
• Take additional care when handling devices during cold weather because heating reduces indoor
humidity and increases static electricity.
Installing the NovaScale Blade 1GB Intel® Ethernet Switch
Module
Statement 8:
xx CAUTION:
Never remove the cover on a power supply or any part that has the following label attached.
Hazardous voltage, current, and energy levels are present inside any component that has this
label attached. There are no serviceable parts inside these components. If you suspect a
problem with one of these parts, contact a service technician.
The following illustrations show how to install a switch module in the rear of the NovaScale Blade
Chassis platform.