manualshive.com logo in svg

Bull 1GB Intel Ethernet Switch Module, Installation And User Manual

The Bull 1GB Intel Ethernet Switch Module brings high-speed networking to your system. Enhance your connectivity with this reliable and efficient module. Unlock the full potential of your device by following the step-by-step instructions provided in the free Installation and User Manual, available for download at our website.

Share
Download
background image

Command Line Interface Management 

 215

Round Trip Time

The time, in hundredths of a second, between the most recent RADIUS accounting 
response and the matching accounting request from this RADIUS accounting 
server.

Accounting Requests

The number of RADIUS accounting request packets sent to this accounting server, 
not including retransmissions.

Accounting Retransmissions

The number of RADIUS accounting request packets retransmitted to this 
accounting server.

Accounting Responses

The number of RADIUS packets received from this accounting server.

Malformed Accounting Responses

The number of malformed RADIUS accounting response packets received from this 
accounting server, including packets with invalid length but not including packets 
with bad authenticators or unknown types.

Bad Authenticators

The number of RADIUS accounting response packets received from this accounting 
server, including packets with invalid authenticators.

Pending Requests

The number of RADIUS accounting request packets sent to this accounting server 
that have not yet timed out or received a response.

Timeouts 

The number of RADIUS packets sent to this accounting server that have timed out.

Unknown Types

The number of RADIUS packets of unknown type received from this accounting 
server.

Packets Dropped

The number of RADIUS packets received from this accounting server dropped for a 
reason not otherwise included in this list.

show radius accounting summary

Use this command to display a summary of the RADIUS accounting configuration parameters for 
the switch.

Format 

show radius accounting summary

Accounting Mode

Indicates whether accounting mode is enabled or disabled.

IP Address 

The IP address of the RADIUS accounting server currently in use.

Port 

The port used to access the accounting server.

Secret configured

Indicates whether a secret has been configured for the accounting server.

RADIUS configuration / summary commands

clear radius stats

Use this command to reset all RADIUS statistics for the switch. You will be prompted to confirm 
this choice.

Summary of Contents for 1GB Intel Ethernet Switch Module





















































































































































































































































































































Reviews:

No comments

Related manuals for 1GB Intel Ethernet Switch Module

Warner Electric MCS202-E1 User Manual preview
MCS202-E1
Brand: Warner Electric Pages: 3
iCeeO2 C30 Instruction Manual preview
C30
Brand: iCeeO2 Pages: 7
SABAF 10 Instructions For Use, Maintenance Instructions preview
10
Brand: SABAF Pages: 6
GE 400 Series Installation Instructions preview
400 Series
Brand: GE Pages: 2
XOXO Modular IXO Operation Manual And Installation Manual preview
IXO
Brand: XOXO Modular Pages: 13
Balboa Water Group BP Series User Interface And Programming Reference Manual preview
BP Series
Brand: Balboa Water Group Pages: 28
EasyIO FG Series User Manual preview
FG Series
Brand: EasyIO Pages: 12
RMG GSM 3ST User Manual preview
GSM 3ST
Brand: RMG Pages: 6
Hama Ni-1 Operating Instruction preview
Ni-1
Brand: Hama Pages: 7
Hama 12183 Operating Instruction preview
12183
Brand: Hama Pages: 44
RadioMaster POCKET Quick Start Manual preview
POCKET
Brand: RadioMaster Pages: 10
K&K M8000 Installation Instructions Manual preview
M8000
Brand: K&K Pages: 6
Walimex Pro Excellence Instruction Manual preview
Excellence
Brand: Walimex Pro Pages: 68
ICP DAS USA I-7188XA User Manual preview
I-7188XA
Brand: ICP DAS USA Pages: 166
ICP DAS USA SMS-531 User Manual preview
SMS-531
Brand: ICP DAS USA Pages: 64
ICS Tunnel Master Jr Manual preview
Tunnel Master Jr
Brand: ICS Pages: 83
ICP DAS USA PROFIBUS PROFI-2510 Quick Start preview
PROFIBUS PROFI-2510
Brand: ICP DAS USA Pages: 4
ICP DAS USA I-8213W-4G User Manual preview
I-8213W-4G
Brand: ICP DAS USA Pages: 40

Brands by name

Popular brands

Load more brands