Bull 1GB Intel Ethernet Switch Module, Installation And User Manual

Page: 245 / 308

Command Line Interface Management
219
IP Address The IP address of the authentication server.
Port The port used to access the authentication server.
Type Indicates whether the server is primary or secondary.
Secret configured
Indicates whether a secret has been configured for the authentication server.
Secure Shell (SSH) commands
config ssh adminmode
Use this command to enable or disable SSH.
Default Disabled
Format config ssh adminmode <enable/disable>
config ssh protocol
Use this command to set or remove protocol levels (or versions) for SSH. Either SSH1 (1), SSH2 (2)
or both (1 and 2) can be set.
Default both
Format config ssh protocol <ssh1/ssh2/both>
show ssh info
Displays the SSH settings.
Format show ssh info
Administrative Mode
Indicates whether the administrative mode of SSH is enabled or disabled.
Protocol Level
The protocol level may have the values of version 1, version 2 or both versions 1
and 2.
Connections Specifies the current SSH connections.
Secure Socket Layer (SSL) commands
config http secureport
Use this command to configure the SSL port where port is between 1 and 65535.
Default 443
Format config http secureport <port>
config http secureprotocol
Use this command to enable or disable SSL and set protocol levels (versions). The protocol level can
be set to TLS1, SSL3 or to both TLS1 and SSL3.
Default both
Format config ip http secure-protocol <ssl3/tls1/both> <add/remove>
config http secureserver adminmode
Command is used to enable/disable the SSL for secure HTTP.