Bull Cedoc Bull Escala 2104 TS4 Installation Manual Download Page 66

Page: 66 / 87

One adapter in one non-HACMP host system connected to one
2104 Model TS4 and an internal RAID array

Figure 40 shows one adapter in one non-HACMP host system connected to one
2104 Model TS4 and an internal RAID array (dual-bus mode).

SCSI interface card.

SCSI adapter:

PCI 4-Channel Ultra3 SCSI RAID Adapter (type number 4-X, feature code 2498)

PCI-X Dual Channel Ultra320 SCSI RAID Adapter (type number 5703, feature
code 5703)

Important:

An RS/6000 or IBM

Eserver

pSeries computer running Linux for

pSeries uses the following to connect to the 2104 Model TS4.

PCI-X Dual Channel Ultra320 SCSI RAID Adapter (type number 5703, feature
code 5703)

Internal RAID array.

Note:

The SCSI address of the adapter that is connected to the 2104 Model TS4
must be different from the addresses of the installed disk drive modules.

2104 Subsystem

Host System

Figure 40. One adapter in one non-HACMP host system connected to one 2104 Model TS4
and an internal RAID array (dual-bus mode)

2104 Model TS4 Installation Guide

Summary of Contents for Bull Escala 2104 TS4
























































































Search results

Summary of Contents for Bull Escala 2104 TS4

Reviews:

Related manuals for Bull Escala 2104 TS4

Brands by name

Popular brands

Bull Cedoc Bull Escala 2104 TS4, Installation Manual

Search results

Summary of Contents for Bull Escala 2104 TS4

Reviews:

Related manuals for Bull Escala 2104 TS4

Brands by name

Popular brands