Bull Cedoc Bull Escala 2104 TS4, Installation Manual

Page: 57 / 87

One adapter in one host system connected to one 2104 Model
TS4
Figure 32 shows one adapter in one host system connected to one 2104 Model
TS4 (single-bus mode).
1
SCSI interface card.
Note: The second SCSI interface card that is in the 2104 Model TS4 is optional.
2
SCSI adapter of one of these types:
v
PCI Dual-Channel Ultra3 SCSI Adapter (type number 4-Y, feature code 6203)
v
PCI 4-Channel Ultra3 SCSI RAID Adapter (type number 4-X, feature code 2498)
v
PCI-X Dual Channel Ultra320 SCSI adapter (type number 5702, feature code
5712)
v PCI-X Dual Channel Ultra320 SCSI RAID Adapter ( type number 5703, feature
code 5703)
Important: An RS/6000 or IBM
Eserver
pSeries computer running Linux for
pSeries uses the following adapters to connect to the 2104 Model TS4.
v
PCI 4-Channel Ultra3 SCSI Adapter (type number 4-Y, feature code 6203)
v
PCI-X Dual Channel Ultra320 SCSI Adapter (type number 5702, feature code
5712)
v PCI-X Dual Channel Ultra320 SCSI RAID Adapter (type number 5703, feature
code 5703)
Note: The 2104 Model TS4 can be connected to an integrated SCSI port instead of
to one of these adapters.
Note: The SCSI address of the adapter that is connected to the 2104 Model TS4
must be different from the addresses of the installed disk drive modules.
2104 Subsystem
1 1
Using System
2
Figure 32. One adapter in one host system connected to one 2104 Model TS4 (single-bus
mode)
Appendix B. Cable configurations
29