Assembly Instructions
Ridlington coal bunker
1
Before you commence the assembly process we recommend that you read these instructions
thoroughly beforehand to familiarise yourself with the assembly process and to also check that you have
the correct components. If for any reason you need assistance, you can find our contact details on the
final page of these instructions.
We highly recommend that any assembly is carried out on a flat, level surface if possible and that you
use another person to assist you if necessary.
Package contents
Tools required
1 x Base
2 x Side panels
1 x Back panel
1 x Front panel
1 x Roof panel
Steel cover panel(s)
75mm & 65mm screws
50mm Black hinge screws
Electric screwdriver with No2 Pozidrive bit
Or No2 Pozidrive Screwdriver
Supplied temporary spacer bar
The Ridlington Coal Bunker