Build Equinox CERV2-6EC, Installation Manuals

Page: 7 / 31

Revision 0.1 [05/10/18] Page 7
Installation Procedure
Unit Installation & Ducting
1. Review Ducting section below to determine most applicable ducting scheme.
2. It is recommended to install the CERV2 in a plastic appliance basin if location is such that water
damage is a concern. A clogged condensate line can cause water to pool around the CERV2. A
moisture sensor and alarm can also be used to notify occupants of a problem.
3. Fix the CERV into position and ensure stability. Unit must be level . Vibration feet (not provided)
should be placed under CERV to reduce vibration and to keep CERV off of a potentially wet floor
surface.