Build Equinox CERV2-6EC, Installation Manuals

Page: 14 / 31

Revision 0.1 [05/10/18] Page 14
Starting and Commissioning the System
Please review all ducting, insulating, condensate drain, and electrical sections before continuing. After all
electrical wiring has been completed and all connections have been double checked, apply power to the unit.
When the unit is first started, it takes approximately 30 seconds to initialize valves and check system health.
For the first 3 minutes after initialization, the CERV will go into an Assess mode. In this mode, it recirculates
air throughout the home and compares to the configured heating, cooling, and ventilation setpoints. For
commissioning the unit, it is important to check the following features of the unit:
Touch Screen Interface
1. The CERV logo will initially show on the screen, and then after approximately 15 seconds, you will enter
the home screen. This screen displays the inside and outside temperature and relative humidity, as
well as the CO2 and VOC indoor air quality levels.
2. In the top right corner of the home screen, there is a small WiFi connectivity icon. For information
regarding setting up the connection to your home router, please see the Appendix.
3. Once the wireless connectivity icon turns green, the CERV has successfully connected to the online
server and is ready to control through your computer or mobile device anywhere in the world!
ECM Fan Speed Configuration
The fan speed has been factory set to 50%. If airflow measurements are being taken for commissioning
purposes the fan speed can be increased or decreased by following the steps in the Appendix.