Build Equinox CERV2-6EC, Installation Manuals

Page: 28 / 31

Revision 0.1 [05/10/18] Page 28
GEO Boost Notes
When an output has been configured as a GEO Boost, the CERV internally handles the logic required to determine when
conditions are right to enable or disable the glycol pump. Depending on indoor and outdoor conditions, the GEO Boost
may do periodic assessments, turning on or off to calculate its contribution to efficiency and capacity of the CERV as a
whole. Because of this, no further configuration, setpoints or otherwise, is needed from the user.
If you would like to check the GEO Boost pump operation manually, you can simply disable, then re-enable device. This
will cause the GEO Boost to turn on and re-assess for several minutes.