14
Operation - Grain Vac
Position Boom
Suction
line
Hydraulic
Boom
Lever
Boom
Lever
Cyclone
Boom
Over Centre Clamp
Over
Centre
Clamp
Main Receiver
Tank Screen
Inside
BPS Screen
Inside
Boom Swivel
1.
Set the park brake and run the tractor at
low idle engine RPM. Place all controls in
neutral. Place chocks ahead and behind
rear tires to prevent machine movement
when operating.
2.
Use the control lever in the cab to engage
the remote hydraulic circuit.
3.
Unlatch boom transport clamp, flip up the
boom lock and swing boom back until it
clears the transport step.
4.
Use hydraulic boom lever (Up to raise,
down to lower). Carefully raise boom high
enough to allow cyclone assembly (at end
of boom) to swivel into position.
5.
Secure cyclone into position, using over
-
center clamp.
6.
Now lift boom all the way into working
position.
7.
Secure boom with Over Centre Clamp.
8.
Attach suction line to the receiver tank
intake coupler. Close camlock couplers.
9.
Flip transport step up during operation of
the grain vac.
WARNING
All bystanders should stay well clear of boom when raising
or lowering it!!
DANGER
Stay at least 15 feet (5 m) away from overhead
power lines when moving the boom. Electrocution
can occur without direct contact.
Summary of Contents for Farm King Grain Vac Conveyair 6640
