TC-Standard (+)
Lock Menu
To protect the menu from unauthorised use, enter a value for the lock code. Menu items can then only be accessed after enter-
ing the correct code.
Display →
toP
→
Loc
This setting will cancel/enable the menu lock.
Parameter range:
0 to 9999
Factory setting:
0 (keylock cancelled)
Note:
This menu will be hidden if the menu is locked.
Restart
Display →
toP
→
rESt
(
rESt
= restart)
The device will restart, all settings are saved. All error messages will be reset.
The moisture detector will be reset, irrespective of the settings in menus
h.Itc
and
h.Moi
.
Parameter range:
YES
: Restart. The display will show the software version for the device and returns to measurement
display.
no
: Exit menu without restarting.
Note:
The user settings will be saved.
Factory settings
Display →
toP
→
rst
This setting restores the factory settings.
Parameter range:
Yes
: factory settings restored.
No
: Exit menu without making changes.
Factory setting:
No
Note:
This menu will be hidden if the menu is locked.
Exit submenu 1
Display → Submenu →
E
Selecting this will return you to the main menu.
5.4.4.1 Submenu 2 (Analog Output 1)
The analog output will display the actual cooler temperature.
Signal behaviour
In normal mode (
noP
) the measuring point will output the actual temperature. For testing purposes you can generate constant
values
hi
,
Lo
or
hALF
. The analogue output will output a constant signal with a value as specified in the table.
Constant
Current output
4 – 20 mA
Voltage output
2 – 10 V
hi
20 mA
10 V
Mi
12 mA
6 V
Lo
4 mA
2 V
noP
4 – 20 mA
2 – 10 V
After testing, the signal behaviour must be changed back to normal mode (
noP
).
23
Bühler Technologies GmbH
BE440026 ◦ 12/2020