5
INTRODUCTION:
The CB-1PR (CBP-2020) Plasma Circle Burner with Remote was designed for plasma bevel
cutting of one to twelve inch diameter holes and will cut beveled holes in light wall pipe or vessels
with wall thickness up to 5/16" (7 mm). An automatic rise and fall cam controls the torch position
for saddle cut holes up to 2/3 of work diameter. The cables and air hoses supplying the unit pass
through slip rings and O-rings enabling the machine to operate continuously in either direction
without cable or hose wrap up. The CB-1PR (CBP-2020) Plasma Circle Burner is supplied with a
Victor / Thermal Dynamics (CutMaster A80) plasma power supply, 180 degree plasma machine
torch and 50' (15 m) control cable / torch lead. The CB-1PR (CBP-2020) Plasma Circle Burner
requires 120/50-60/1 to operate, and see power source requirements on page 11. The unit must
be mounted on a carriage or fixture.
FEATURES:
• 1/12 HP P.M.
motor and rotational speed control
• 180 degree plasma machine torch
• 50 ft. (15 m) control cable / torch lead
• Adjustable vertical and horizontal torch positioning system
• R
ise and fall cam assembly with 5" (125 mm) of travel
• B
rushes and collector rings for plasma current, rated at 200 AMPS
• B
rushes and collector rings for all controls, eliminates cable and hose wrap
• P
lasma cutting power supply, CutMaster A80 with duty cycles of 80% at 80
AMPS and 100% at 70 AMPS
• Rotation speed and directional controls
• M
anual / Off / Automatic control switch
• R
emote mounted control box