background image

37

WARRANTY

Limited 3-Year Warranty

MODEL  ________________________________

SERIAL NO.  ____________________________

DATE PURCHASED:  _____________________

WHERE PURCHASED: ___________________

For a period ending one (1) year from the date of invoice, Manufacturer warrants that any new machine or part 

is free from defects in materials and workmanship and Manufacturer agrees to repair or replace at its option, any 

defective part or machine.  HOWEVER, if the invoiced customer registers the Product Warranty by returning the 

Warranty Registration Card supplied with the product within 90 days of the invoice date, or by registering on-line at 

www.bugo.com, Manufacturer will extend the warranty period an additional two (2) years which will provide three 

(3) total years from the date of original invoice to customer.  This warranty does not apply to machines which, 

after Manufacture’s inspection are determined by Manufacturer to have been damaged due to neglect, abuse, 

overloading, accident or improper usage.  All shipping and handling charges will be paID by the customer.    

The  foregoing  express  warranty  is  exclusive  and  Manufacturer  makes  no  representation  or  warranty  (either 

express or implied) other than as set forth expressly in the preceding sentence.  Specifically, Manufacturer makes 

no express or implied warranty of merchantability or fitness for any particular purpose with respect to any goods. 

Manufacturer shall not be subject to any other obligations or liabilities whatsoever with respect to machines or 

parts furnished by Manufacturer.

 

Manufacturer shall not in any event be liable to Distributor or any customer for any loss of profits, incidental or 

consequential damages or special damages of any kind.  Distributor’s or customer’s sole and exclusive remedy 

against Manufacturer for any breach of warranty, negligence, strict liability or any other claim relating to goods 

delivered pursuant hereto shall be for repair or replacement (at Manufacturer’s option) of the machines or parts 

affected by such breach.

Distributor’s Warranty:

In no event shall Manufacturer be liable to Distributor or to any customer thereof for any warranties, representations 

or promises, express or implied, extended by Distributor without the advance written consent of Manufacturer, 

including but not limited to any and all warranties of merchantability or fitness for a particular purpose and all 

warranties, representations or promises which exceed or are different from the express limited warranty set forth 

above.  Distributor agrees to indemnify and hold Manufacturer harmless from any claim by a customer based 

upon any express or implied warranty by Distributor which exceeds or differs from Manufacturer’s express limited 

warranty set forth above.

HOW TO OBTAIN SERVICE:

IF YOU THINK THIS MACHINE IS NOT OPERATING PROPERLY, RE-READ THE INSTRUCTION MANUAL 

CAREFULLY, THEN CALL YOUR AUTHORIZED BUG-O DEALER/DISTRIBUTOR. IF THEY CANNOT GIVE 

YOU THE NECESSARY SERVICE, WRITE OR PHONE US TO TELL US EXACTLY WHAT DIFFICULTY YOU 

HAVE EXPERIENCED. BE SURE TO MENTION THE MODEL AND SERIAL NUMBERS.

Summary of Contents for CB-1PR







































Reviews: