manualshive.com logo in svg

Buffalo TeraStation WSS WS5020N6, User Manual

Share
Download
Buffalo TeraStation WSS WS5020N6 User Manual Download Page 113

LCD Message

Description

Corrective Action

E11 Fan Failure

An error occurred in the fan 
speed.

Check that no foreign objects or dust are clogging 
the fan. If any foreign objects or dust are found, 
use a pair of tweezers, air duster, or other tools to 
remove them. If the error is displayed again, contact 
Buffalo technical support for assistance.

E12 Cooling Failure

A rise in the system temperature 
may have exceeded the 
allowable safety value.

Do not place objects in the area around the 
TeraStation. Also, move the TeraStation to a cool 
location.

E16 Drive x Not 
Found

Unable to find the drive.

The drive may be disconnected or may have failed. 
After shutting down, reinstall the drive.

E30 Replace Drive x

An error occurred, so the drive 
was removed from the volume.

Replace the drive.

I10 System Is 
Overheating

A rise in the system temperature 
may have exceeded the 
allowable safety value.

Move the TeraStation to a cool location. Do not place 
objects in the area around the TeraStation.

I12 Degraded Mode

Operating in degraded mode.

Check if the E30 message is also displayed on the 
LCD panel. In such a case, refer to the corrective 
action for the E30 message. If only this message is 
displayed, refer to the “I12 Message Appears Despite 
No Drive Errors” section in chapter 8.

I18 Rebuilding Drive 
x...

Rebuilding the volume.

Note: 

Transfer speeds are slower 

during the rebuilding process.

Wait until resynchronization finishes. It will take 
about 23 hours for a RAID 5 volume and about 2–3 
hours for a mirrored volume per a 4 TB TeraStation 
model. This message will disappear when 
resynchronization finishes.

I33 Replication 
Failure

An error occurred in replication.

From Buffalo Replication, click 

Sync

 to execute 

resynchronization. If the error is displayed again, 
contact Buffalo technical support for assistance.

I52 New Firmware 
Available

A new firmware version has been 
released.

Update the firmware.

I54 Backup Job x 
Failed

The backup job failed.

Make sure that the backup job is configured 
correctly. Make sure that the NAS is on and not in 
standby mode. If the backup job still fails, check 
the status of NAS, network, and backup source and 
destinations. Also, check the backup log to see if any 
errors were recorded.

Default Settings

Administrator’s Name

Administrator

Password

password

Shared Folders

Drives C and D are configured as administrative hidden shares 
by Windows Storage Server’s default settings.

DHCP Client

Normally, the TeraStation will get its IP address automatically 
from a DHCP server on the network. If no DHCP server is 
available, then an IP address will be assigned as follows:
IP Address: IP address will be assigned starting from “169.254”.
Subnet Mask: 255.255.0.0

Registered Groups

Windows Storage Server’s default groups are registered.

Microsoft Network Group Setting

WORKGROUP

110

Summary of Contents for TeraStation WSS WS5020N6




















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands