Maintenance Settings - Disk Scan
Disk Scan:
The
Disk Scan Target
is the disk
that is to be scanned. The
Internal HDD
option
is for LinkStation’s internal hard drive. If a
USB Hard Drive is connected to LinkStation,
then it will also be available from the pull-down
menu. Please select the disk that should be
scanned. If both disks are to be scanned, then
the
Disk Scan’
must be run twice; once for each
disk.
Disk Scan Type:
The
Disk Scan Type
pull-down menu allows you to select whether the
Disk Scan
is to be a
Normal
or a
Thorough scan
. A
Normal
scan is a fast disk scan. The
Thorough Scan
will
scan every sector individually. The
Thorough Scan
can take up to several hours to complete. It is
recommended that you not access LinkStation or turn LinkStation off during a
Thorough Scan
.
