Buell 2003XB9S, Service Manual

Page: 106 / 588

2003 Buell XB9S: Chassis 2-3
HOME
Front isolator snubber, upper 12-36 in-lbs 1-4 Nm page 2-59
Front isolator threaded frame insert 49-51 ft-lbs 66.4-69.1 Nm LOCTITE 222,page 2-59
Hand lever pivot fastener 60-120 in-lbs 9-14 Nm page 2-26
Handlebar clamp screws 10-12 ft-lbs 14-16 Nm tighten front screws first, page 2-70
Heel guard fasteners, passenger 48-72 in-lbs 5-8 Nm page 2-76
Heel guard fasteners, rider 72-96 in-lbs 8-11 Nm page 2-75
Master cylinder banjo bolt, front 16-20 ft-lbs 22-27 Nm page 2-29
Master cylinder banjo bolt, rear 16-20 ft-lbs 22-27 Nm page 2-38
Master cylinder cover fasteners, front 9-13 in-lbs 1.0-1.5 Nm page 2-27
Master cylinder mounting fasteners, rear 72-96 in-lbs 8-11 Nm page 2-36
Muffler mounting block fastener, front 22-25 ft-lbs 30-34 Nm page 2-74
Muffler mounting block fastener, rear 32-36 ft-lbs 43-49 Nm page 2-74
Muffler strap fastener, front 108-120 in-lbs 12-14 Nm page 2-74
Muffler strap fastener, rear 48-60 in-lbs 5-7 Nm page 2-74
Oil cooler air scoop 120-144 in-lbs 14-16 Nm page 2-83
Oil drain plug 29-31 ft-lbs 39-42 Nm page 2-57
Oil line fittings 29-31 ft-lbs 39-42 Nm page 2-57
Pivot shaft pinch bolt 17-19 ft-lbs 23-26 Nm page 2-58
Ram air scoop 12-36 in-lbs 1-4 Nm page 2-83
Rear fender fastener 12-36 ft-lbs 1-4 Nm page 2-78
Rear remote master cylinder reservoir
fastener
48-72 in-lbs 11-14 Nm page 2-36
Rotor mounting fasteners, front 25-27 ft-lbs 34-37 Nm metric, Replace with new, page 2-13
Rotor mounting fasteners, rear 25-27 ft-lbs 34-37 Nm metric, Replace with new, page 2-16
Safety interlock fastener 7-10 in-lbs 0.8-1.1 Nm page 2-64
Shock absorber, lower 15-17 ft-lbs 20.3-23 Nm page 2-58
Shock mounting fastener, upper 49-51 ft-lbs 66-69 Nm page 2-62
Sidestand bracket fasteners 25-27 ft-lbs 34-37 Nm page 2-96
Sidestand pivot bolt 18-20 ft-lbs 24-27 Nm page 2-97
Sidestand switch fastener 36-60 in-lbs 4-7 Nm page 2-96
Sprocket cover fastener 12-36 in-lbs 1-4 Nm LOCTITE 222, page 2-77
Sprocket fasteners 35-37 ft-lbs 48-50 Nm Replace with new, page 2-16
Steering stem capnut 38-42 ft-lbs 52-57 Nm page 2-52
Steering stem pinch fastener 17-19 ft-lbs 23-26 Nm LOCTITE 272, page 2-52
Swingarm brace mounting fasteners 25-27 ft-lbs 34-37 Nm page 2-58
Swingarm pivot shaft 24-26 ft-lbs 32-35 Nm page 2-58
Switch housing fasteners, right 25-33 in-lbs 3-4 Nm page 2-63
Torca clamp 40-45 ft-lbs 54-61 Nm page 2-74
Valve stem nut 40-44 in-lbs 4-5 Nm page 2-20
Wear Peg, rider 36-48 in-lbs 4.1-5.4 m page 2-75
ITEM TORQUE NOTES