14
MA201435_13.1
[Original Instructions]
6/25/2012
Parameters Fields
There are multiple parameter fields available. Use the Parameter Scroll button
to scroll
through the LCD screen to display the different parameters.
HEAT
TIME
1:00min
COOL
TIME
3:00min
PRESSURE
4200psi
Figure 12
Parameter Fields 1
HEAT TIME
Displays the amount of time the specimen will be heated. Use the Increase
or Decrease buttons to select a time between 0 to 20 minutes, in 10-second
increments.
COOL TIME
Displays the amount of time a specimen will be cooled. Use the Increase or
Decrease buttons to select a time between 0 to 30 minutes, in 10-second
increments.
PRESSURE
Displays the amount of pressure applied to the specimen. Use the Increase
or Decrease buttons to select between 1200 psi to 4400 psi (80 bar
– 300
bar), in 100 psi (5 bar) increments.
TEMP-
ERATURE
300F
PRELOAD
PRESSURE
OFF
MOLD
SIZE
1.25IN
Figure 13 Parameter Fields 2
TEMPERATURE
Displays the temperature selected. Use the Increase or Decrease buttons to
select a temperature variable between 120
F (50
C) and 360
F (180
C), in
20
F (10
C) increments.
PRELOAD PRESSURE
Displays the minimum pressure applied at the beginning of a cycle
before full pressure is applied. Use the Increase or Decrease buttons to
select OFF or a range of psi between 0 psi to 400 psi (0 bar
– 30 bar), in
50 psi (5 bar) increments.
MOLD SIZE
Displays the mold size selected for the specimen. The automatic mold
sensor will automatically display the mold size. There are eight mold sizes
available.
1 in
25 mm
1.25 in
30 mm
1.50 in
40 mm
2.00 in
50 mm
