Boiler block assembly
7
31
We reserve the right to make any changes due to technical modifications.
Installation and maintenance instructions Logano G215 US oil/gas-fired boilers • Issue 11/2004
z
Slightly lift the side panel.
z
Hook the side panel upper cutout into the upper tie-
bar.
z
Hook the rear part of the side panel to the extended
hook.
z
Push against the lower end of the side panel and
secure with the rear panel using the snap nut.
Installing the top front boiler cover
z
Hook the front boiler cover with its cutout into the
upper tie-bar and push back.
z
Secure the front boiler cover with two self-tapping
screws to the side panels.
Fig. 40
Slot side panel into place
1
Top tie-bar
2
Extended hook
1
2
Fig. 41
Fasten the side panel to the rear panel with screws
1
Snap nut
1
Fig. 42
Installing the front boiler cover
NOTICE
Installation of the back boiler cover
(
Î
Chapter 8.8, page 41).
