manualshive.com logo in svg

Buderus Logamatic 4121, Operating Instructions Manual, Page: 12 / 88

Share
Download
Buderus Logamatic 4121 Operating Instructions Manual Download Page 12

Safety

4

 Logamatic 4121, 4122 and 4126 - Subject to technical modifications.

12

4.6

Cleaning the control unit

z

Only clean the control unit with a damp cloth.

4.7

Disposal

z

Dispose of the control unit packaging in an 
environmentally responsible manner.

z

The lithium battery in the CM431 module may 
only be replaced by your local heating contractor.

  WARNING! 

RISK OF SCALDING

For thermal disinfection, the entire DHW 
system is set at the factory to heat up to 
70 °C (start: Tuesday night at 01:00 h). 

z

If required (e.g. shift work), your local 
heating contractor can alter the start 
time.

z

During this time, never open any hot 
water tap without mixing in cold water if 
the DHW circuit of your heating system 
is not equipped with a thermostatic 
mixer.

z

As there is a risk of scalding at 
temperatures above approximately 
60 °C, ask your local heating contractor 
about the set DHW temperatures.

CAUTION!

SYSTEM DAMAGE

from frost!

 

When the heating system is switched off, 
it can suffer damage from frost.

z

Protect your heating system against 
frost damage by draining it and the 
DHW pipework at the lowest possible 
point.

Summary of Contents for Logamatic 4121

























































































Reviews:

No comments