Clock:
If Channel is set to “Clock” (after 16 and before 0) a different interface is
displayed:
Bus:J Chan:Clock
Div: 1/4 : 3/8
The Div fields allow the 225e to generate 10 volt pulses based on rhythmic
divisions of an incoming MIDI clock. The numerator represents a count; valid
values are 1-8. The denominator represents a note length. Valid values are:
1:
Whole note
8:
Eighth note
2:
Half note
12: Eighth note triplet
3:
Half note triplet
16: Sixteenth note
4:
Quarter note
24: Sixteenth note triplet
6:
Quarter note triplet
32: Thirty-second note
A pulse is issued after every count of note lengths. In the example above, 1/4
means “every quarter note” and 3/8 means “every third eighth note”.
Additional switches:
MIDI Reset button
: To restore all voltages and internal parameters to their
nominal values, hit "MIDI reset". This also sends "all notes off" and "all
controllers off" messages to all channels.
Remote Enable:
To enable storage and retrieval of your settings as part of a
preset, engage "remote enable".
The MIDI interface’s settings may be locally stored and subsequently recalled
by the accompanying preset manager.
To connect or disconnect this module from the central library function, push
the remote switch. The lighted red LED signifies a connection
225e Preset Manager__________________
For operation of the Preset Manager on the 225e, please refer back to the
Preset Manager (225e or 206e):
description at the beginning of this manual
(page7).
Summary of Contents for 200e series
Page 5: ...Grey knob settings cannot be stored and will always represent the setting you see...
Page 11: ......
Page 14: ......
Page 33: ......