www.btx.com
25
LIVE STREAMING CONTENT OVER LAN
(K2 OR K3 SERIES AS THE SERVER)
1
2
3
No.
Description
1
Press Start to begin streaming after you have configured streaming using the steps above. The Start button will glow orange
to confirm the appliance is streaming, and a count-up timer will appear to the right of the controls, to keep you informed
of the elapsed streaming time.
2
Press “Stop” to end streaming the session.
3
Click the gear to configure record parameters.
No.
Description
No.
Description
1
Check the enable box to stream the Film (program) channel.
6
Choose the resolution.
2
Name: Any name you choose, except in the case
of RTMP Push, where it must be the stream name
or key provided by the CDN.
7
Check the enable box to also stream RTSP streams.
3
Choose the streaming protocol.
8
Switch to the SOURCE tab to configure source streaming.
4
Choose the Bitrate.
9
Copy the displayed URL and share them with users
to watch live streams.
5
Choose the frame rate.
10
Click OK when finished.
Any source, as well as the program output may be individually streamed. To prepare for streaming
a session, follow these instructions:
Note:
The Film (program) channel provides two unique stream paths to stream program content. You may enable both in the following scenarios:
A.
High Low streams so that users with limited bandwidth may still receive a live stream.
B.
Sending streams by 2 different protocols ie. RTMP streams for computer users using a player and HLS streams for mobile device users.
C.
Sending RTMP Push streams to 2 different CDN (Facebook AND YouTube)
4
2
5
8
3
6
1
7
9
10
