www.btx.com
20
STEP 3:
ASSIGNING SOURCES TO CHANNELS: AV OVER IP INPUTS (ONVIF ENABLED)
In each of the preview boxes in the channel strip, you will notice a
gear in the upper right corner.
Click the gear to enter the Channel Configuration window.
3
2
After you select a
source
, its signal type, resolution, frame rate and state will be displayed in the window.
Unlike discrete sources like 3G-SDI and HDMI, any encoded signal will not be adjustable and therefore,
any picture adjustments should be made at the source.
Click
OK
1
Check the
Enable IPC
box
Here you will select the appropriate AV over IP source by IP address. Any AV over IP source that you
authorized in
Step 1
will be available in the pull down menu.
rtsp://
192.168.1.191
/live
av0
URL Scheme
IP Address of Host
Path Segment #1
Path Segment #2
