www.btx.com
21
STEP 3:
ASSIGNING SOURCES TO CHANNELS: AV OVER IP INPUTS (NON-ONVIF ENABLED)
In each of the preview boxes in the channel strip, you will notice a
gear in the upper right corner.
Click the gear to enter the Channel Configuration window.
1
2
3
Use the pull down menu to select the
IPC source
by IP address. After you select a
source
, its signal
type, resolution, frame rate and state will be displayed in the window. Unlike discrete sources like
3G-SDI and HDMI, any encoded signal will not be adjustable and therefore, any picture adjustments
should be made at the source.
Click
OK
Check the
Enable RTSP
box
Enabling non-ONVIF IP sources manually
Here you will manually enter the RTSP address of the AV over IP source. As above, these AV over IP encoded
signals will not be adjustable and therefore, any picture adjustments should be made at the source.
