19
Publication 5423-020-REV 1.0 • www.btxonline.com
Using Specialty Electrodes
Plug the specialty electrodes into the front ports of the
BTX ECM 630.
Scroll through available protocols.
Double tap desired selection (Preset Protocol or User Protocol).
Scroll through available tissue/cell types.
Double tap desired tissue/cell.
Review parameters.
Position electrodes on area being electroporated.
To run tap the Omega icon.
57
80
81
55
56
With load measurement OK, press the Green ‘Go’ icon to run
protocol.
While the pulse is being delivered, the Red ‘x’ icon can be used to
stop the protocol at any time.
79
Using an HT Plate Handler
(continued)
Once protocol is complete, data regarding your pulse is displayed
and stored in the systems logs for future use.
You may continue pulsing, go back to the settings screen or
protocol select screen, or to the home screen.
Using Specialty Protocols
NOTE: Generator will display readings after first and last pulse.
